VQC-6
- 6 ½ ” round surface with 5/16 I.D. Bushings located 2 ½” and 4” apart and a pull stud system through the middle
- 4 slots 90 degrees apart in line with the 5/16 reamed holes, mounting is easily accomplished with standard t-nuts and screws
- Housing: 4140 heat -treated to 30 Rockwell and finished with electroless nickel
- Drawbar: 4330 (Aircraft quality) ground and polished heat treated to 30 Rockwell and finished with chrome plating
- Jaws: 4330 (Aircraft quality) heat treated and finished with black oxide
- Valve Housing: 6061 Al hard anodized
- Tubiing for air: Copper
- .313 bushings: D2 tool steel heat-treated to 60 Rockwell
|
VQC-8
- 9” round surface with 5/16 I.D. Bushings located 2 ½” and 4” apart and 3/8” I.D. Bushings located 7 1/2” apart, and a pull stud system through the middle
- 4 slots 90 degrees apart in line with the 5/16 reamed holes, mounting is easily accomplished with standard t-nuts and screws
- Housing: 4140 heat -treated to 30 Rockwell and finished with electroless nickel
- Drawbar: 4330 (Aircraft quality) ground and polished heat treated to 30 Rockwell and finished with chrome plating
- Jaws: 4330 (Aircraft quality) heat treated and finished with black oxide
- Valve Housing: 6061 Al hard anodized
- Tubiing for air: Copper
- .313 bushings: D2 tool steel heat-treated to 60 Rockwell
|
AAQC-6 & AAQC-8
- Face-plates: 5.937” or 6.437” round surface with 5/16 I.D. bushings located 2 ½” and 4” apart and a pull stud system through the middle. Indexer is required to have a through hole with a 1-1/4” minimum through hole
- 4140 heat treated to 30 Rockwell
- Drawbar bushing: EMCO
- Pistons: 6061 aluminum hard anodized
- Die springs: 3EA heat treated
- .313 bushings: D2 tool steel heat-treated to 60 Rockwell
- Drawbar: 4330 (Aircraft quality) ground and polished heat treated to 30 Rockwell and finished with chrome plating
- Jaws: 4330 (Aircraft quality) heat treated and finished with black oxide
|
Repeatability within each or between the different units: +/- .0002” or better precision: .0001” per 2” depending on the precision with which the fixture is made max load: 100 lbs tested and approved indexing precision: equivalent to fourth axis or indexer
ALL SYSTEMS CAN BE CUSTOM RETROFIT TO FIT ANY MACHINE OR ROTARY TABLE